static bending in Chinese

• 静力弯曲
• 静曲
• 静弯曲

• "static" in Chinese :     static2 n. 1.〔美国〕【物理学】 ...
• "bend" in Chinese :    n. 1.【徽章】(盾上自右上至左下的)右斜线。 2.〔 ...
• "quasi static bending moment" in Chinese :    准静态弯矩
• "static bending failure" in Chinese :    静曲破坏
• "static bending test" in Chinese :    静弯试验
• "front fork - static bending test" in Chinese :    静态弯曲测试
• "bending" in Chinese :    波束曲折; 波纹加工; 拱曲作用; 海冰波动; 连结网目; 挠曲，弯曲配曲调 ...
• "to bending" in Chinese :    折弯
• "static" in Chinese :    adj. 1.静止的，静态的，静力的。 2.【物理学】天电的，静电的。 3. ...
• "bending bending moment" in Chinese :    弯矩增值
• "static checkpoint static chp" in Chinese :    固定检查站
• "after bending" in Chinese :    弯曲后
• "air bending" in Chinese :    空中弯折
• "alternating bending" in Chinese :    反复弯曲; 交变负荷弯曲; 交变弯曲; 交替反向弯曲; 交替弯曲
• "amount of bending" in Chinese :    挠曲量

• Static bend and torsion testing of intramedullary rods
  髓内用杆的静态弯曲及扭转试验
• Test methods for static bending fatigue of fine ceramics
  精细陶瓷静态挠曲疲劳的试验方法
• Laminated wood plastics . compreg determination of static bending
  木质层积塑料.静曲强度的测定
• Verification regulation of 3000kn rail static bending test machine
  3000kn钢轨静弯试验机检定规程
• Medium density fiberboard determination of static bending strength and elastic modulus
  静曲强度和弹性模量的测定
• Paper and board tests . method to determine the stiffness of paper and board by static bending
  纸张和纸板试验.纸张和纸板静态弯曲挺度测定方法
• Wood . static bending . determination of modulus of elasticity in static bending using small clear specimens
  木材.静力抗弯强度.用无瑕疵小试件测定静力抗弯强度试验中的弹性模量
• The changes of characteristics of material and geometry caused by stamping all influence the precision of cae . in this thesis it also shows that a typical structure and a simplified car model were built using one step forming and mapping method based on vpg and kmas software , thus enabling us to define it fast fine simulation method ( ffs ) ; likewise , the pure static bend test and the front impact test complied with ecer42 were respectively completed
  4 .本文首次将快速精细仿真分析( fastfinesimulation - ffs )方法应用到车身典型结构件的静态纯弯特性研究,利用kmas软件进行了该仿真模型一步成型拉延分析,通过试验和仿真分析结果对比,验证了拉延工艺对车身结构件力学特性的重要影响。
• In this dissertation , in allusion to the limit that the domestic analysis and studies of the body structure only concentrate on the static bend , torsion and some extreme conditions in nowadays and the studies on transient analysis of the whole vehicle that contains the suspension model , tire model and the road model are few , the applications of the fem on the analysis of the car body structure are studied . and in this dissertation the method of building connecting means models , the dynamic response of the body , the fatigue analysis of the body and the reforming measures of the body are deeply discusses
  本论文针对目前国内车身结构分析的研究只限于对车身或车架结构在静态扭转、弯曲载荷以及几种极限工况载荷作用等几种情况的研究,对含有悬架、轮胎以及路面模型的整车瞬态响应分析的研究较少的实际情况,对有限元方法在汽车结构分析中的应用作了些研究工作,尤其是在车身连接件处理、车身动态响应、车身疲劳强度分析、车身结构改进方案等方面进行了较深入的探索。
• Abstract : in this paper , the ship structure is analyzed by using 3d overall structure finite element method and the longitudinal strength is calculated when the hydro - static bending moment , wave bending moment , horizontal bending moment and torsion moment are considered . we compare the calculating result with the one based on the theory of thin - walled box girders and discuss the future of application of the two methods
  文摘:本文对3800箱集装箱船进行了整船有限元分析,计算了在设计静水弯矩、波浪弯矩、水平弯矩和扭矩作用下的船体总纵强度,并与基于薄壁梁扭转理论的总纵强度计算结果进行了比较,对两种方法的应用前景作出评论。

• "static bending" meaning: [Architecture] Bending under a constant load or a very slo...